Server API, Jog control (ru)
- 10 years ago.
Server API, Jog control
Command "SetJog" is used for Jog control through Srever API.
Command syntax is "SetJog Parameter". Parameters listed in table below
| Parameter | Description |
| x+ | start jog X+ direction |
| x- | start jog X- direction |
| y+ | start jog Y+ direction |
| y- | start jog Y- direction |
| z+ | start jog Z+ direction |
| z- | start jog Z- direction |
| a+ | start jog A+ direction |
| a- | start jog A- direction |
| b+ | start jog B+ direction |
| b- | start jog B- direction |
| c+ | start jog C+ direction |
| c- | start jog C- direction |
| x+y+ | start jog in 2 axes X+,Y+ directions |
| x-y- | start jog in 2 axes X-,Y- directions |
| x+y- | start jog in 2 axes X+,Y- directions |
| x-y+ | start jog in 2 axes X-,Y+ directions |
| xstop | stop jog in X axis |
| ystop | stop jog in Y axis |
| zstop | stop jog in Z axis |
| astop | stop jog in A axis |
| bstop | stop jog in B axis |
| cstop | stop jog in C axis |
| xystop | stop jog in X, Y axes |