Available in the latest versions of myCNC software, the program progress window allows for a quick visual reference regarding the time elapsed, the current line number, and the number of lines remaining.
Plasma Profiles
The progress bar is located on the bottom of the 1366P profile window, and displays the Time Elapsed, the Estimated Time Remaining, and the percent progress bar.
Mill Profiles
The progress window is located near the bottom right corner, showing the total number of lines, the current line, the time elapsed, and the estimated time remaining.
A postprocessor for myCNC controllers was added to DeskProto CAM software. It is available for download from 2019 Jan21 with new DeskProto V7.0 bugfix release.
We are working on a new style screen for Mill machines
The screenshots below are preview for 3 axes mill
Change Pump Implementation
Charge pump output can be easily implemented in myCNC control software through the Software PLC.
To do it
Goto the "Software PLC"
- Press "Add" to add new PLC procedure
Enter the procedure filename (CHARGE_PUMP), press "OK" button
Enter source code for change pump
main()
{
n=0;
port=0;
do{
n++;
if (n&1) { portset(port); } else {portclr(port);};
}while(1);
exit(99);
};
Press buttons "Save" and "Build"
Output pin defined "port" variable will start pulse generation.
....
port=0;
....
The result oscillogram is shown below
A few new shapes were added to the Library. We have now 75 flat shapes and a few shapes for tube cutting.
