We added colour chooser for the last version of myCNC software.

Buttons configuration can be programmed in XML configuration files of myCNC profiles.

However, colours can be picked-up in "Screen->Colors" configuration dialog for the last profiles "X1366P", "X1280P"

New design for Gantry alignment (gantry squaring) popup widget in user dialog under development.

We try to make Gantry squaring procedure with two motors on each side on the gantry more user-friendly. User will be able to see a calculated correction. It's supposed that second squaring procedure run should give zero correction. Squaring procedure precision can be tested easily.

Armbian OS (Debian Linux) for Tinkerboard does not have 1368x768 resolution by default and I used 1280x720 for a while. Today I found very nice solution

• Open terminal window, type
  cvt 1280 800
  This should give you the modeline values to put into:
  /etc/X11/xorg.conf.d/20-modesetting.conf
•  Then add
  
  Section "Monitor"
  Identifier "HDMI-1"
  Modeline "1280x800_60.00"   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync
  Option "PreferredMode" "1280x800_60.00"
  EndSection
  
  
• Reboot Tinkerboard, new mode 1280x800 should appear in display settings.

PS: version for 1368x768 is :

• Open terminal window, type
  cvt 1368 768
  This should give you the modeline values to put into:
  /etc/X11/xorg.conf.d/20-modesetting.conf
•  Then add
  
  Section "Monitor"
  Identifier "HDMI-1"
  Modeline "1368x768_60.00"   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync
  Option "PreferredMode" "1368x768_60.00"
  EndSection
  
  
• Reboot Tinkerboard, new mode 1368x768 should appear in display settings.

Store, restore and update Profile configuration to/from myCNC support server was added to the myCNC software.

Profile name, date and myCNC controller unique identification number stored on the server. You can restore configuration exactly for your controller/machine or update Factory settings for your profile.