Ivan M
Articles
myCNC 1.88.3759 - input and keyboard panel filters, Report tab fixes (ru)
Posted 4 years ago
461 hits
New Features
The latest release of myCNC software brings improvements to filter out unwanted signals on common inputs, as well as signals sent from the operator panel. These...
Cutcharts for Kjellberg Super Focus 200 added to myCNC (ru)
Posted 4 years ago
294 hits
We have added the Kjellberg Smart Focus 200 cutcharts support to myCNC. These cutcharts contain more than 80 combinations to account for different materials, process currents...
myCNC for Raspberry Pi - Tested on Ubuntu Mate (ru)
Posted 4 years ago
472 hits
The myCNC application has now been successfully ported to a Raspberry Pi build of Ubuntu MATE. Ubuntu MATE is an official light-weight derivative of Ubuntu which uses the MATE...
Gear cutter synchronization for a finishing cut (ru)
Posted 4 years ago
318 hits
Below is a video of a finishing cut being performed by a gear cutter with a myCNC controller, provided to us by a client of ours. As can be seen, the spindle and the rotation...
Gear cutter synchronization (ru)
Posted 4 years ago
936 hits
Зуборезная синхронизация (например, для чистовой обработки и т.д.) доступна как часть программного пакета myCNC.
https://www.youtube.com/watch?v=D9X-R_8v2iw
Как показано на...
myCNC for Raspberry Pi - Development updates (ru)
Posted 4 years ago
408 hits
Bringing myCNC software to Raspberry Pi has long been an ambition of ours - Raspberry Pi's are ubiquitous in makerspaces, machine shops and universities across the world thanks...
Line driver to 5V converters now available (ru)
Posted 4 years ago
374 hits
As mentioned in our previous blog post, we are now beginning to carry line driver to 5V converters in our online shop (bundled in with our ET6, ET7 and ET10...
Converters will be available soon (ru)
Posted 4 years ago
332 hits
Converters for drivers such as ClearPath will soon be available upon request. Previously, the driver would only activate above a certain threshold due to the difference between...
Fusion360 4 axis mill post processor for myCNC (ru)
Posted 4 years ago
503 hits
We now have an official Fusion360 post processor for 3- and 4-axis milling machines using myCNC. The new post processor is available here directly, or by searching for "myCNC"...
[NEW RELEASE] myCNC v1.88.3676 - 2 Axis tangential knife setups, visualization enhancements (ru)
Posted 4 years ago
477 hits
A new myCNC update (version 1.88.3676) has been released.
New features
2 Axis (No tool lift) tangential knife setups setting. This setting allows users to use systems...
Powered by CjBlog