Super User
Articles
Wireless Pendant XHC setup (for Windows) (ru)
Posted 9 years ago
6099 hits
1. Download "Zadig" software from http://zadig.akeo.ie/
2. Run the utility, select "Options menu" and check menu "List All Devices"
3. Select "USB HID" device in the...
ET5, using encoder inputs as General purpose inputs (ru)
Posted 9 years ago
3698 hits
ET5, using encoder inputs as General purpose inputs
ET5 control board contains 12 encoder inputs. Each encoder inputs has input signals A, B, Z. All encoder input pins can be...
Server API, Pendant control emulation (ru)
Posted 9 years ago
1870 hits
Server API, Pendant control emulation
Server API has a command to simplify Pendant control emulation. This command can be used for writing third-patry Pendant control device...
Hardware outputs (binary, DAC, PWM) manipulation thourgh Server API. (ru)
Posted 9 years ago
2215 hits
Hardware outputs (binary, DAC, PWM) manipulation thourgh Server API.
There are 3 ways to manipulate myCNC control board Hardware outputs through Serve API:
Direct...
Hardkeys definition. (ru)
Posted 9 years ago
2716 hits
Hardkeys definition.
Binary inputs can be used as Pendant control buttons. Number of functions can be assigned flexibly to any of binary input, "Button-Press" and/or...
How to change Scale and Rotation Angle. (ru)
Posted 9 years ago
1784 hits
How to change Scale and Rotation Angle.
There are 2 version of command "SetScale" in the Server API to change scale of given g-code file.
For both commands g-code program...
How to add Custom popup window to main screen. (ru)
Posted 9 years ago
1526 hits
How to add Custom popup window to main screen.
To insert new popup window we need to edit "cnc-screen.xml" configuration file for current profile.
1) Find in cnc-screen.xml...
Documentation (ru)
Posted 9 years ago
1146 hits
Please visit myCNC Online Documentation website to find the last information about myCNC software, and myCNC ET6, ET7, ET10 control boards.
myCNC Software User Manual (2015...
ET3+7PC stand alone CNC controller kit. (ru)
Posted 9 years ago
6703 hits
ET3+7PC stand alone CNC controller kit.
The kit contains:
Ethernet CNC control board myCNC-ET3;
Mini computer Cubieboard2 (Dual Core ARM 1GHz, 1G RAM, 4G NAND Flash);
7"...
ET1 firmware update (ru)
Posted 9 years ago
3261 hits
HowTo update firmware on CNC controllers myCNC-ET1
Reflash utility is available for Linux and Windows.
For Linux: ftdi_sio module should be active on the system for...
Powered by CjBlog