Tube cutting - Y-tube mode

  • 4 years ago.
Hits: 508

Tube cutting is a feature on the X1366P profiles designed for S- and Y-tubes (such as the X1366PYT profile).

The following settings are available:

  • Y Tube Cutting enable/disable toggle: turns the tube cutting mode ON and OFF. Toggling between tube and sheet cutting is available on the main screen of the X1366PYT profile (top bar)
  • Pulses per revolution: Number of pulses per one full revolution, divided by pi (3.14…)
  • Tube diameter: in mm

New tube cutting modes are currently in beta-testing (as of July 2020). S-tube (square tube) cutting will be added in addition to Y-tube cutting in future releases.

Below is the screen of the new X1366PYT profile (note the new buttons in the top ribbon):